5. Press the Unload button on the HCS control panel.
Wait until the Unload indicator lights and then open the HCS front door.
6. Open the front door after the Unload indicator lights.
7. Pull out the stacker cart and gently remove the jammed paper.
8. Push the stacker cart straight into the HCS.
9. Close the front door.
10. If the UI indicates there is a jam in the print engine, follow the instructions on the
screen to remove any paper in the area indicates.
11. Follow the instructions displayed on the UI to resume printing.
14-7Xerox
®
Color J75 Press
User Guide
High Capacity Stacker (HCS)
To Next Page
Loading...
