Important
Always power off the Power Switch first and then power off the Main Power Switch.
Power on
After turning the power on, the machine takes approximately 3 minutes to warm up
before you can start making copies.
1. Open the cover.
2. Press the power switch to the On position.
The Please wait... message indicates that the machine is warming up. The machine
cannot be used while it is warming up.
Power off
1. Press the power switch to the Off position.
2. Verify that the UI display is turned off completely, before turning on the machine
again.
Energy Saver
Note
The terms Power Saver and Energy Saver are used synonymously.
The Energy Saver feature has two modes:
• Low Power: After remaining inactive for a preset time period, the machine enters the
Low Power mode.
• Sleep Mode: After entering Low Power and remaining inactive for another preset
time period, the machine enters the Sleep mode.
Xerox
®
Color J75 Press1-6
User Guide
Product overview