078-282
Cause: Paper Tray 5 (Bypass) malfunctioned.
Remedy: Power-cycle the machine. If the tray errors are not fixed by performing the
relevant remedy, contact the Customer Support Center.
078-283
Cause: Paper Tray 5 (Bypass) malfunctioned.
Remedy: Power-cycle the machine. If the tray errors are not fixed by performing the
relevant remedy, contact the Customer Support Center.
078-281
Cause: Paper Tray 5 (Bypass) malfunctioned.
Remedy: Check the paper loaded in Tray 5 and then power off/on the printer.
078-282
Cause: Paper Tray 5 (Bypass) malfunctioned.
Remedy: Power off/on the printer.
091-311
Cause: Charge Corotron cleaner failure.
Remedy: Power-cycle the machine. If the error is not fixed by performing the relevant
remedy, contact the Customer Support Center.
091-320
Cause: Charge Corotron fault.
Remedy: Power off/on the machine.
116-210
Cause: An error occurred with the media reader.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
116-701
Cause: 2 sided print could not be made due to insufficient memory.
Remedy: Print each side.
116-704
Cause: A media is not inserted correctly.
Remedy: Insert the media correctly.
116-713
Cause: Job was divided and printed due to insufficient disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
10-27Xerox
®
Color J75 Press
User Guide
Problem solving
To Next Page
Loading...
