Xerox Color J75 Press - Page 227

• Close the HCS front door.
049-969
Cause: Stacker cart elevator motor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Remove any paper from the stacker cart.
• Close the HCS front door.
049-970
Cause: Stacker limit or full sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Remove any paper from the stacker cart.
• Close the HCS front door.
049-971
Cause: Stacker limit or full sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Remove any paper from the stacker cart.
• Close the HCS front door.
049-972
Cause: Stacker limit or full sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Remove any paper from the stacker cart.
• Close the HCS front door.
14-25Xerox
®
Color J75 Press
User Guide
High Capacity Stacker (HCS)