Xerox Color J75 Press - Page 270

012-221
Cause: The finisher malfunctioned.
Remedy: Perform the following:
Power off/on the machine, and if necessary, resend/restart your print job.
If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.
012-223
Cause: The finisher malfunctioned.
Remedy: Perform the following:
Power off/on the machine, and if necessary, resend/restart your print job.
If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.
012-225
Cause: The finisher malfunctioned.
Remedy: Perform the following:
Power off/on the machine, and if necessary, resend/restart your print job.
If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.
012-226
Cause: The finisher malfunctioned.
Remedy: Perform the following:
Power off/on the machine, and if necessary, resend/restart your print job.
If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.
012-227
Cause: The finisher malfunctioned.
Remedy: Perform the following:
Power off/on the machine, and if necessary, resend/restart your print job.
If the error persists, contact the Customer Support Center.
• Check for any obstructions in the paper path and clear them.
012-228
Cause: The finisher malfunctioned.
Xerox
®
Color J75 Press15-42
User Guide
Standard/Booklet Maker Finisher