Xerox Color J75 Press - Page 313

Machine serial number
on the machine
on the UI
Machine Status 8-1
Billing Information 8-3
Faults 8-3
Machine Information
Supplies
Tools tab 8-5
Stored Programming
Maintenance 9-1, 12-8
replacing consumable supplies
Customer Replaceable Units (CRUs)
Media
loading media in the Bypass tray (Tray 5)
4-5
loading media in the optional OHCF 12-2
loading media in Trays 1, 2, and3 4-1
Multiple-Up 5-22
Multisheet Inserter (MSI), See Bypass tray
O
Optional feeding devices 1-7
Optional finishing devices 1-7
Ordering supplies
Customer Replaceable Units (CRUs) 9-6
Original Orientation 5-15
Original Size 5-12
Original Type 5-7
Output Color 5-5
Output Format 5-16
2 Sided Copying 5-6
Annotations 5-24
Booklet Creation 5-16
Copy Output 5-6
Covers 5-18
FaceUp/Down Output 5-26
Folding 5-26
Page Layout
Multiple-Up
Variable Repeat 5-22
Poster 5-24
Tab Margin Shift 5-25
Transparency Options 5-22
Watermark 5-25
Oversized High Capacity Feeder
OHCF (Trays 6/7) specifications 12-27
OHCF problem solving 12-13
OHCF specifications
Oversized High Capacity Feeder (OHCF) 1-7, 1-,
12-1, 12-
Overwrite Hard Disk 8-2
P
Page Layout
Multiple-Up
Variable Repeat 5-22
Paper
curl
settings on Interface Module 13-3
settings on the Interface Module 13-3
loading paper in the Bypass tray (Tray 5)
4-5
loading paper in the OHCF (Trays 6/7) 12-2
loading paper in Trays 1, 2, and3 4-1
paper curl settings on the Interface Module
tray 5 (Bypass) 4-5
trays 1, 2, and 3 4-1
Paper jams 10-1
at Interface Module lever 1a
at Interface Module lever 2a
at Interface Module lever 2b
at OHC F lever 1b and knob 1c
at OHCF lever 1a and knob 1c
at OHCF lever 1d and knob 1c
Bypass (Tray 5) 10-11
Document feeder jams 10-1
Document jams under the document
feeder belt 10-4
Envelope jams in the Bypass tray 10-12
High Capacity Stacker (HCS)
E1, E2, and E3 14-5
E4, E5, and E6 14-6
E7 14-8
E8 14-9
in the Interface Module
inside the OHCF trays (A1-1 and A1-2)
Interface Module
lever 1a 13-5
lever 2a 13-6
lever 2b 13-8
Inverter jams (bottom right cover) 10-12
Lower left cover jams 10-6
Main unit jams 10-7
OHCF
inside trays A1-1 and A1-2 12-14
lever 1a and knob 1c 12-15
lever 1b and knob 1c 12-16
lever 1d and knob 1c 12-17
SquareFold Trimmer Module 16-13
E1/E2 16-14
E3 16-16
Standard Finisher Plus
finisher stacker tray 15-31
finisher top tray 15-30
iiiXerox
®
Color J75 Press
User Guide
Index