Installation and Setup
32 Xerox
®
ColorQube 8580/8880 Color Printer
User Guide
Modifying General Settings
You can modify printer settings from the control panel such as the language, date and time, and units of
measurement. You can also enable or prevent automatic Startup page printing when the printer is
turned on.
Configuring General Setup Options
You can configure general setup options for your printer from the control panel.
To configure general setup options:
1. At the printer control panel, use the arrows to navigate to Printer Setup, then press OK.
2. Select an option.
− Control Panel Setup: You can use this option to access settings such as Language and Control
Panel Brightness.
− Printer Controls: You can use this option to access settings such as the Startup Page, Date and
Time, and Metric Defaults.
3. To configure a setting, navigate to the option that you want to change, then press OK.
To view all general setup options, print a menu map. For details, see Printing a Menu Map on page 24.
Setting the Date and Time
You can set the date and time at the control panel. The date and time stamp appears on various printed
documents and reports.
To set the date and time:
1. At the printer control panel, use the arrows to navigate to Printer Setup, then press OK.
2. Navigate to Printer Controls, then press OK.
3. Navigate to Date and Time, then press OK.
4. Select an option.
5. To increase or decrease the value for an option, use the arrows, then press OK.
6. When you are finished, navigate to Exit, then press OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
