Installation and Setup
Xerox
®
ColorQube 8580/8880 Color Printer 33
User Guide
Disabling the Startup Page
The Startup page provides basic printer configuration information, such as printer name, serial number,
font, firmware, and Ethernet versions. The Startup page is configured to print each time you turn on your
printer. If you do not want the Startup page to print, you can turn off the feature.
To disable the Startup page:
1. At the printer control panel, use the arrows to navigate to Printer Setup, then press OK.
2. Navigate to Printer Controls, then press OK.
3. To disable the Startup page, press OK.
Modifying Power Settings
You can modify power usage settings for Power Saver or Fast Resume modes at the printer control panel.
Setting a Power Saver Mode
Your printer has power-saving modes that reduce energy consumption without shutting off the printer.
You can set the Power Saver mode at the control panel.
Note: You cannot put the printer into Power Saver mode when the printer is processing a job,
warming up, cleaning, or shutting down.
To specify the Power Saver mode:
1. At the printer control panel, use the arrows to navigate to Printer Setup, then press OK.
2. Navigate to Printer Controls, then press OK.
3. Navigate to Warm-up Mode, then press OK.
4. Select an option.
− Intelligent Ready causes the printer to wake and sleep based on previous usage patterns.
− Job Activated causes the printer to wake when it detects activity.
− Scheduled causes the printer to wake and sleep according to a schedule you specify.
5. Press OK.
Enabling Fast Resume Mode
Fast Resume mode overrides the default power saver timeouts and increases energy usage. To bring the
printer out of power saving and standby modes more quickly, you can use Fast Resume.
To enable Fast Resume:
1. At the printer control panel, use the arrows to navigate to Printer Setup, then press OK.
2. Navigate to Printer Controls, then press OK.
3. Navigate to Fast Resume, then press OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
