2 Operation with Windows 95, Windows 98 and Windows Me
10 Xerox WorkCentre 118 Postscript® User Guide
Configuration Tab Settings
This section describes the settings of the Configuration tab.
Select the function that you want to set in the Features List and change the settings in
the Change box below.
NOTE: You can restore defaults by clicking [Restore Defaults].
NOTE: The settings that can be selected vary depending on which options have been
installed. Change these settings only after confirming that the option settings are
complete. See Options Tab Settings on page 12.
Settings
Image Enhancement - Specifies whether or not to use the Image Enhancement
function. Selecting [On] smooths out boundaries when printing. This reduces jagged
edges by artificially increasing the resolution of the image. When printing a bitmapped
image composed of coarse halftone dots, smooth color gradation is impossible in
certain situations. In this case, select [Off].
Draft Mode - Specifies whether or not to reduce the amount of toner used when
printing drafts. When [On] is selected, the overall printed color becomes lighter. This is
best for printing documents when high print quality is not necessary.
Bypass Feed Orientation - Specifies the paper orientation when printing from the
bypass tray. When feeding the short edge of the paper first, select [Landscape]. When
feeding the long edge of the paper, select [Portrait].
To Next Page
Loading...
Need help?
General