3 Operation with Windows NT 4.0
18 Xerox WorkCentre 118 Postscript® User Guide
Device Settings Tab Settings
This section describes Installable Options in the Device Settings tab. To print correctly,
it is necessary to make appropriate settings in this tab.
Select the items in Installable Options and change the settings in the Change Setting
box at the bottom of the tab.
Settings
Duplex Module - Specifies whether a duplex unit is installed. Select Installed when the
duplex unit is installed. When you select Installed, it is possible to select the Duplex
feature in the Paper tab.
Tray Options - Specifies the paper tray type installed on the machine.
When [2-Tray Configuration] is selected, Tray 1 and Tray 2 can be used.
When [4-Tray Configuration] is selected, Tray 1 to Tray 4 can be used .
Offset Catch Tray - Specifies whether an offset catch tray is installed. Select Installed
when an offset catch tray is installed. When you select Installed, it is possible to set Job
Offset in the Configuration tab.
Paper Size Settings - Specifies the paper size group for different areas to enable the
selection of paper size common to that location.
Switch Paper Size (8K/16K) - Indicate your language preference to enable the set of
8K and 16K paper size that is best suited to your needs.
To Next Page
Loading...
Need help?
General