Xerox Copycentre C118 Software Guide

3 Operation with Windows NT 4.0
20 Xerox WorkCentre 118 Postscript® User Guide
Advanced Tab Settings
This section describes the settings of Printer Features in the Advanced tab.
Select the items from Printer Features under Document Options of the Advanced tab
and change the settings in the Change Setting box at the bottom of the tab.
NOTE: The settings that can be selected vary depending on which options have been
installed. Change these settings only after confirming that the option settings are
complete. See Device Settings Tab Settings on page 18.
Settings
Offset Stacking - The position of individual jobs or sets of copies are shifted to either
side of the output tray to enable easy separation.
Feed Separators from - Specifies the paper tray that transparency dividers are to be
fed from. When [Auto] is selected, the tray set on the machine is used as the feed
destination.
Print on Separators - Specifies whether or not to print on the transparency dividers as
well as the transparency.
Paper Type (Separators) - Specifies a paper type for the transparency divider.
Bypass Feed Orientation - Specifies the paper orientation when printing from the
bypass tray. When feeding the short edge of the paper first, select [Landscape]. When
feeding the long edge of the paper, select [Portrait].

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English