Xerox Copycentre C118 Software Guide

2 Operation with Windows 95, Windows 98 and Windows Me
12 Xerox WorkCentre 118 Postscript® User Guide
Options Tab Settings
This section describes the settings in the Options tab.
Select the items in Hardware Options and change them in the change box below. To
use this function, it is necessary to make appropriate settings in this tab.
NOTE: You can restore defaults by clicking [Restore Default].
Settings
Duplex Module - Specifies whether a duplex unit is installed. Select Installed when the
duplex unit is installed. When you select Installed, it is possible to select the Duplex
feature in the Paper tab.
Tray Options - Specifies the paper tray type installed on the machine.
When [2-Tray Configuration] is selected, Tray 1 and Tray 2 can be used.
When [4-Tray Configuration] is selected, Tray 1 to Tray 4 can be used.
Offset Catch Tray - Specifies whether an offset catch tray is installed. Select Installed
when an offset catch tray is installed. When you select Installed, it is possible to set Job
Offset in the Configuration tab.
Paper Size Settings - Specifies the paper size group for different areas to enable the
selection of paper size common to that location.
Switch Paper Size (8K/16K) - Indicate your language preference to enable the set of
8K and 16K paper size that is best suited to your needs.
Memory - Displays the amount of printer memory.

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English