Xerox DocuMate 3220 User Manual

Xerox
®
DocuMate
®
3220
User’s Guide
107
Send to Application
The Send to Application link allows you to select any application on your computer as the scan
destination.
Supported file types—all file formats in OneTouch are available when scanning to this destination. After
you configure the link, as described below, make sure you select a file format that the application can
open. Please refer to Text Formats on page 66 to see a list of text file formats that are available when
OCR is installed.
Destination type—this destination type is classified as “Document Management Link”. To make it
available in the destination list, you must select
Document Management on the Options tab in the
OneTouch Properties window.
You must configure this destination before attempting to scan to it the first time. If you scan without
configuring the link first, the OneTouch log viewer will open and show that sending the image to the
Send to Application link failed.
• Click the
Properties button to open the OneTouch Link Properties for the Send to Application link.
From this window, you can configure the default application for this link.
After configuring the link properties, all of the default scan configurations will immediately update
to send to the application you specify in this window. When you create new configurations, the
default settings will also match what you have selected here. If you modify the options in an
individual configuration, changing the options in this Link Properties window will no longer update
to the configurations you modified.
•Click the
New, Copy, or Edit button to open the Scan Configuration Properties window. Click on the
Send to Application tab and use this window to set a configuration to scan to a different
application than the one selected in the Link Properties window.
Changing the options in this window only affects the configuration you are creating or modifying.
All other configurations will retain their settings for this destination.

Xerox DocuMate 3220 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	222 x 965 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	23 ppm
ADF scan speed (color, A4)	13 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	46 ipm
Duplex ADF scan speed (color, A4)	26 ipm
Scanner type	Flatbed & ADF scanner
Product color	Gray
Sensor type	CIS
Scan drivers	TWAIN, WIA
Daily duty cycle (max)	1500 pages
Auto document feeder (ADF) input capacity	65 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Minimum storage drive space	350 MB
Bundled software	Visioneer OneTouch\\r Nuance PaperPort\\r Nuance OmniPage Pro
Sustainability certificates	ENERGY STAR
Certification	RoHS
Maximum ISO A-series paper size	A4
Power supply type	-
Package depth	592.07 mm
Package width	400.04 mm
Package height	284.98 mm
Package weight	6708 g
Compatibility	Xerox DocuMate Scanners
Country of origin	China

Weight and Dimensions

Depth	452 mm
Width	323 mm
Height	124 mm
Weight	3800 g