Xerox DocuMate 3220 - Page 31

Xerox
®
DocuMate
®
3220
User’s Guide
31
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
2. On the Xerox License Agreement window, read the license agreement. If you accept the terms,
select
I Agree then click Next.
If you choose not to accept the license agreement, click
Cancel. Click Close on the Installation
Interrupted window.
3. The software will now be installed.
4.
Stop when you see the “Complete the installation by connecting your hardware” window. Do not
click
OK yet. Leave the window open and proceed to the next section.
NOTE: If you do not see this on-screen diagram for connecting the scanner, stop and follow the
instructions below.