Xerox
®
DocuMate
®
3220
User’s Guide
58
• Reduce Moiré patterns—moiré patterns are wavy, rippled lines that sometimes appear on the
scanned images of photographs or illustrations, particularly newspaper and magazine
illustrations. Selecting
Reduce moiré patterns will limit or eliminate moiré patterns in the scanned
image. This option is only available when scanning in Color or Grayscale at lower resolutions, and
when the scanner supports this feature.
If you are scanning using an Automatic Document Feeder, and the page is fed through at too
great of an angle, the image may not straighten correctly. In that case, re-scan the page using the
paper guides to feed the paper in straight.
•
Invert image—only available for Black&White Mode, this option reverses the black and whites of
an image.
•
Skip blank originals—select this option to have the scanner detect if a blank page has been fed
through the scanner, and remove it from the final file. Typically you might use this option when
scanning a stack of two-sided pages which have a number of blank sides.
Sensitivity—you can adjust the sensitivity level of the blank image detection.
Note that when the Options tab feature
Use job separator in multi-page batch is enabled, and the
option selected is
When a blank page is detected, the sensitivity level for Skip Blank Originals is the
sensitivity level that will be used when both features are enabled.
Note that when the feature
Use job separator in multi-page batch is enabled, and the option
selected is
When the number of images reaches, the blank originals are discarded before the images
are counted. For example, if you scan 3 pages in duplex mode, each side of the page is counted as
an image and the total number of images is 6. When Skip Blank Originals is enabled, and 2 of the
3 pages in the stack are blank on one side, the total number of images counted is 4 not 6.
•
Manual Feed Mode—select this option to enable a delay from when the last page is scanned and
when the scanner stops the scan job.
To scan with manual feed mode:
1. Select
Manual feed mode.
2. In the
Timeout field, input the amount of time you want the scanner to wait from when the
last page is scanned and when the scanner stops scanning.
3. Place a document in the scanner.
4. Click
Scan.
5. The scanning progress dialogue on-screen will display a countdown indicating how much
time you have to place the next document in the scanner.
6. When you are done scanning all pages in your document, you can click on
Abort to stop the
timer or simply let the timer run out.
Original Image Inverted Image
To Next Page
Loading...
Need help?
General
Weight and Dimensions
