Xerox DocuMate 4799 - Install the Double Feed Prevention roller

Scanner Setup Xerox
®
DocuMate
®
4799
User Guide 3-3
3. Pull on the scanner cover release and lift the lid to open the scanner.
4. Flip open the double feed prevention roller cover.
5. Align the roller bar with the brackets in the roller compartment. Make sure the groove on the
right side of the roller bar is aligned so that it slides in place into the U shape of the bracket.
The roller is properly in place when you cannot rotate the metal bar of the roller.
6. Close the double feed prevention roller cover when you are finished.