Scanner Options, Maintenance and Troubleshooting Xerox
®
DocuMate
®
4799
User Guide 6-13
3. Pinch the plastic tab that locks the roller to the metal bar and pull the roller away from the
bar. Do this for each of the rollers.
4. Discard the rollers, they cannot be repaired or reused.
5. Take the new rollers out of their packaging.
6. Align the end of the bar with the hole in the rollers and slide the rollers onto the bar. The
rollers will click when they are locked in place.
7. Lift the roller cover up and carefully push it closed to lock it in place. Make sure everything is
aligned properly and the cover is fully closed. If the cover is not fully closed it will break during
scanning and damage the scanner.
To Next Page
Loading...
