Xerox DocuMate 515 User Manual

DocuMate 515 Scanner User’s Guide 31
Scanning
• Straighten Image—Select this option to let the scanner automatically
determine if a page is skewed, then straighten its image. If the page is
fed through at too great an angle, the image may not straighten
correctly. In that case, re-scan the page using the paper guides to
feed the paper in straight.
• Invert Image—Only available for Black&White Mode, this option
reverses the black and whites of an image.
• Color Filter—Color filter is the ability of your scanner to automatically
remove a color from a scanned item. For example, if you are
scanning a letter with a red watermark, you can choose to filter out
the red so the scanned letter just shows the text and not the red
watermark. Color filter applies to Black&White or GrayScale Mode.
Click on Apply to save the changes on the Page Settings tab.
Original Image. Inverted Image.
The original with a red
watermark over black text.
The scanned item with the
red filtered out.

Xerox DocuMate 515 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	65536
Input color depth	24 bit
Maximum scan size	216 x 356 mm
Scanner type	ADF scanner
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Minimum storage drive space	350 MB
Maximum duty cycle	75000 pages per month
Country of origin	China
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	445 x 330 x 178 mm
Box depth (imperial)	19.7 \
Box width (imperial)	15.7 \
Box height (imperial)	4.9 \
Package width	398.779 mm
Package height	124.459 mm
Package length	500.379 mm
Package weight	3900.9 g
ISO A-series sizes (A0...A9)	A4

Weight and Dimensions

Depth	330 mm
Width	445 mm
Height	178 mm
Weight	5200 g