DocuMate 515 Scanner User’s Guide 77
Maintenance
Cleaning the Scanner Glass
Scanning items that have excessive amounts of dirt or dust may dirty the
glass. To ensure the best quality scanned item, wipe the scanner glass
with a soft, dry, clean cloth to rid the glass of dust or other debris.
If any residue remains after wiping the glass with a dry cloth, try adding a
few drops of Isopropyl alcohol (rubbing alcohol) to the cloth and wipe off
the residue.
Clearing Paper Jams
If your scanner stops scanning due to a paper jam in the Automatic
Document Feeder, a warning dialog box opens after a few moments.
Open the Automatic Document Feeder cover. Remove the jammed paper
and close the cover.
To reduce the number of paper jams, smooth and straighten paper before
scanning, adjust the guides to the paper size, and insert the paper evenly
into the ADF.
NOTE: If lines appear on the images scanned with the ADF, but not on
the Flatbed glass, the raised, thin plate of glass used by the ADF may
be dirty. This plate is at the side of the glass and has the white
reference frame. When pages are pulled through the ADF during
scanning, this thin glass plate is where the images are captured by the
scanner.
Clean the raised, thin
plate of glass here if
lines appear on
scans from the ADF,
but not from the
Flatbed glass.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
