DocuMate 515 Scanner User’s Guide 71
Scanning from the TWAIN Interface
Creating a New Advanced Interface Profile
You can create and save Advanced Interface profiles.
To create a new profile:
1. Select one of the preset profiles, for example Custom.
2. Adjust the settings and click the Save As button.
3. Type a name for the new profile and click OK. The name must be at
least two characters long.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.
Display the Device Configuration
Click the Device Configuration button on the Advanced Interface.
The Device configuration window opens and shows the information about
your scanner.
See the section “Checking the Hardware and Setting the Lamp Power
Saving” on page 58 for more information about the device settings.
To Next Page
Loading...
