Xerox DocuMate 515 User Manual

DocuMate 515 Scanner User’s Guide 57
Scanning
11. Repeat the process to create additional new configurations, such as
one named “Personal Receipts.”
12. Make sure to designate separate folders as the Storage Locations for
the new configurations.
You will now have multiple configurations set up for the Transfer to
Storage destination, and each configuration scans documents to
separate folders.
Scan to multiple storage folders:
1. Open the One Touch Properties window.
2. Click the button you’ve set up for archiving documents.
3. Select one of the configurations you created for storage.
4. Click OK. The One Touch Properties window closes.
5. Now either press the button on the scanner, or click it on the
One Touch Button Panel.
The documents are scanned to the folder specified for the
configuration.
6. When scanning is finished, open the One Touch Properties window
again and select the other configuration you created for storage.
7. Click OK. The One Touch Properties window closes.
8. Now either press the button on the scanner again, or click it on the
One Touch Button Panel.
When scanning is finished, the documents are stored in the two separate
folders.
The new
configurations apply
to the Transfer to
Storage Destination
Application.

Xerox DocuMate 515 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	65536
Input color depth	24 bit
Maximum scan size	216 x 356 mm
Scanner type	ADF scanner
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Minimum storage drive space	350 MB
Maximum duty cycle	75000 pages per month
Country of origin	China
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	445 x 330 x 178 mm
Box depth (imperial)	19.7 \
Box width (imperial)	15.7 \
Box height (imperial)	4.9 \
Package width	398.779 mm
Package height	124.459 mm
Package length	500.379 mm
Package weight	3900.9 g
ISO A-series sizes (A0...A9)	A4

Weight and Dimensions

Depth	330 mm
Width	445 mm
Height	178 mm
Weight	5200 g