Xerox DocuMate 515 User Manual

DocuMate 515 Scanner User’s Guide 73
Scanning from the Windows Image Acquisition Interface
7. Adjust settings of the previewed image as desired.
If you’re scanning from the Flatbed, change the size of the scanned
image. To do this, click and hold the mouse pointer over one of the
four sizing-boxes on the corners of the previewed image. Then drag
the box to increase or decrease the size of the image.
8. Preview the image again. When you are satisfied with the image, click
the Scan button.
9. The scanned images will appear in Microsoft Paint (or other WIA
application you’re using).
NOTE: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.

Xerox DocuMate 515 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	65536
Input color depth	24 bit
Maximum scan size	216 x 356 mm
Scanner type	ADF scanner
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Minimum storage drive space	350 MB
Maximum duty cycle	75000 pages per month
Country of origin	China
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	445 x 330 x 178 mm
Box depth (imperial)	19.7 \
Box width (imperial)	15.7 \
Box height (imperial)	4.9 \
Package width	398.779 mm
Package height	124.459 mm
Package length	500.379 mm
Package weight	3900.9 g
ISO A-series sizes (A0...A9)	A4

Weight and Dimensions

Depth	330 mm
Width	445 mm
Height	178 mm
Weight	5200 g