Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
108
PDF Applications
PDF destinations are applications that can open and/or edit the Adobe PDF file format.
Supported file types—applications in the PDF destination group support the *.pdf file format. When the OmniPage
module or software is installed, OneTouch includes an option to scan as sPDF or nPDF. Selecting either of these two
formats still creates a *.pdf file, but the “s” and “n” letters indicate that OCR will process the image before sending
the file to the PDF application.
• sPDF—this format creates a *.pdf file that contains the original image of the scanned page, with a hidden text
layer that allows you to search for text in the file.
• nPDF—this format creates a *.pdf file that can be edited in a PDF application. Any pictures in the scanned
image are isolated from the text, the text on the page is recognized and turned into editable text, and the
pictures are placed back into the document in the same flow as the original document.
Destination type—this destination type is classified as “PDF Link”. To make it available in the destination list, you
must select PDF applications on the Options tab in the OneTouch Properties window.
If the PDF application you are using does not appear in the Select destination list, you can add the application using
the Text Documents OneTouch Link Properties window.
1. Click on the Options tab in the OneTouch Properties window.
2. Make sure PDF applications and Text editing applications are selected then click back on the button tab.
Please note that any PDF application you add manually to OneTouch will be classified as a “Text Based Link.”
These applications will only show in the destination list when Text editing applications are enabled.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
