Xerox DocuMate 5445

Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
206
Cleaning the Double Feed Detection Sensors
You should clean these sensors as part of your standard weekly maintenance of the scanner.
Note: Do not clean the sensors with the roller cleaning paper.
Preparation
• Turn off the scanner prior to cleaning the sensors.
• You will need a cotton swab.
Cleaning the Sensors
1. Press the ADF cover release button and open the scanner.
2. The following illustration shows the location of the sensors in the scanner.
3. Carefully clean the sensors with a dry cotton swab.