Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
224
Xerox DocuMate 5445 / 5460 Specifications
Optical resolution 600 dpi
Bit depth 24-bit color, 8-bit grayscale, 1-bit bitonal (black & white)
Scan method Duplex Automatic Document Feeder (ADF)
ADF specifications
Minimum item size 1.9 x 2.8 inches (48 x 71 mm)
(The minimum supported paper length is 71 mm except when scanning an Acceptable
Card Type using the mixed batch card guide. Card size: 3.4 x 2.13 inches (86 x 54 mm))
Maximum item size
Scanning Speed Xerox DocuMate 5445
- 45 pages per minute / 90 images per minute @ 200 dpi
Xerox DocuMate 5460
- 60 pages per minute / 120 images per minute @ 200 dpi
Capacity 75 pages of 20 lb printer paper (75 - 80 gsm)
Paper Thickness 5 ~ 55 lbs. (19 ~ 206 gsm)
Image Sensor Dual CIS (Contact Image Sensor)
Light source Dual RGB-LED lamps
Interface Hi-Speed USB 2.0, compatible with USB 1.1
Scanner dimensions
Width 12.50 inches (318 mm)
Depth 8.20 inches (208 mm)
Height 7.70 inches (196 mm)
Weight 8.0 pounds (3.65 kg)
Operating temperature 50° ~ 90.5° F (10° ~ 32.5° C without condensation)
Relative humidity 20% ~ 80% (@30° C without condensation)
Firmware version lower than 2.0
• 8.5 x 100 inches (216 x 2540 mm)
Firmware version 2.0 and higher
• Maximum page length varies by resolution
Resolution Xerox DocuMate 5445 Xerox DocuMate 5460
75 dpi* 8.5 x 150 inches (216 x 3810 mm) 8.5 x 195 inches (216 x 4953 mm)
100 dpi 8.5 x 150 inches (216 x 3810 mm) 8.5 x 195 inches (216 x 4953 mm)
150 dpi 8.5 x 150 inches (216 x 3810 mm) 8.5 x 195 inches (216 x 4953 mm)
200 dpi 8.5 x 150 inches (216 x 3810 mm) 8.5 x 195 inches (216 x 4953 mm)
300 dpi 8.5 x 150 inches (216 x 3810 mm) 8.5 x 195 inches (216 x 4953 mm)
400 dpi 8.5 x 150 inches (216 x 3810 mm) 8.5 x 150 inches (216 x 3810 mm)
500 dpi 8.5 x 120 inches (216 x 3048 mm) 8.5 x 120 inches (216 x 3048 mm)
600 dpi 8.5 x 100 inches (216 x 2540 mm) 8.5 x 100 inches (216 x 2540 mm)
1200 dpi* 8.5 x 100 inches (216 x 2540 mm) 8.5 x 100 inches (216 x 2540 mm)
*this is an interpolated resolution which is available with software Visioneer Acuity
only.