96 5 Control Panel Menus
PostScript
Specifies the settings related to PostScript.
Note
• You need to restart the printer to activate the new settings. After making the settings, switch the printer
off and then on again.
XPS
Sets the XPS-related settings.
Note
• This feature is available on Windows Vista and Windows Server 2008 only.
Item Description
PS Error Report Sets whether to print an error report in case of a PostScript error.
• [On] (default)
•[Off]
PS Job Time-out Sets the amount of time the printer waits for a print job. If a time-out occurs during data
reception, the printer stops the reception and starts printing the received data.
Specify the time-out value in 1 minute increments.
• [Off] (default)
Disables the job time-out.
• [1 Minutes] to [900 Minutes]
Init PS Disk Clears the area used for PostScript of the hard disk. Use this menu to delete all of the
PostScript data in the hard disk.
Note
• [Init PS Disk] appears only when the hard disk (optional) is installed.
PaperSelect Mode Sets whether to enable the PostScript DMS (Deferred Media Selection) feature.
• [Auto] (default)
Enables the DMS feature.
•[Select FromTray]
Disables the DMS feature and selects a paper tray.
Default Color Sets the color mode. This settings is used when the color printing mode setting is not
specified for the print job that is sent to the printer.
• [Black]
Prints in black and white mode.
• [Color] (default)
Prints in the color mode.
Item Description
Print Ticket Specifies the method of handling XPS-format job tickets.
• [Standard Mode] (default)
Handles Fuji Xerox standard job tickets.
• [CompatibleMode]
Handles Microsoft job tickets (Print Ticket).
•[Off]
Disables handling XPS job tickets.
Note
• After changing this setting, reboot the printer.
To Next Page
Loading...
Need help?
General