EasyManuals Logo

Xerox DocuPrint C2255 Quick Referenc Guide

Xerox DocuPrint C2255
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58 5 Troubleshooting
The whole page is printed
black.
A drum cartridge is damaged or has deteriorated. Depending on its condition, the drum
cartridge may need replacement. Contact our Customer Support Center or your dealer.
There may be something wrong with the high-voltage power supply. Contact our
Customer Support Center or your dealer.
Output is blank. Multiple sheets were fed at once. Fan the paper and reload it in the tray.
A drum cartridge is damaged or has deteriorated. Depending on its condition, the drum
cartridge may need replacement. Contact our Customer Support Center or your dealer.
There may be something wrong with the high-voltage power supply. Contact our
Customer Support Center or your dealer.
Output is partially blanked-out.
Vertical white streaks appear
on output.
The paper is not appropriate for the printer. Load appropriate media.
Refer to
“Supported Paper” (P. 40)
The paper is damp. Load fresh paper.
A drum cartridge is not installed correctly.
Correctly install the drum cartridge.
The printer's interior may not be clean.
Clean the interior of the printer.
Condensation may have formed in the printer.
On the control panel, set the Sleep mode trigger time to more than one hour, and let the
printer stand with its power on. After about an hour, the heat inside the printer causes
the condensation to evaporate.
Refer to
Sleep Mode Timer: ‘User Guide’
A drum cartridge or the fuser unit is damaged or has deteriorated. Depending on its
condition, the drum cartridge or fuser unit may need replacement. Contact our
Customer Support Center or your dealer.
White patches appear on output.
Toner is scattered around
images.
Images are bluish.
The image transfer voltage (the [Voltage Offset] setting on the control panel) may not be
set properly.
Adjust the transfer voltage on the control panel.
Refer to
Voltage Offset: ‘User Guide’
The paper type of the selected paper tray is not appropriate. Change the [Paper Type]
setting and try printing again. For example, if [Paper Type] is set to [Plain], try changing
it to [Bond] or [Recycled]. If it is set to [Heavyweight], try changing it to
[ExtraHeavyweight].
Symptom Cause/Remedy

Table of Contents

Other manuals for Xerox DocuPrint C2255

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox DocuPrint C2255 and is the answer not in the manual?

Xerox DocuPrint C2255 Specifications

General IconGeneral
BrandXerox
ModelDocuPrint C2255
CategoryPrinter
LanguageEnglish

Related product manuals