Xerox Phaser 5335

46 Installing and Configuring the PostScript Driver on Linux
[Options Installed] Setting
The components of this setting are listed in the table below
[Duplex Module] Radio Button
The options are listed in the table below.
NOTE: Unlike the Windows driver and Mac driver, the default is the full configuration.
[Hard Disk] Radio Button
The options are listed in the table below.
NOTE: Unlike the Windows driver and Mac driver, the default is the full configuration.
[Memory] Drop-down Menu
The options are listed in the table below.
NOTE: Unlike the Windows driver and Mac driver, the default is the full configuration.
Option Default
Duplex Module Radio button
Hard Disk Radio button
Memory Drop-down menu
Paper Tray Configuration Drop-down menu
Option Default
Not Available
Available
i
Option Default
Not Available
Available
i
Option Default
Standard 64 MB
320 MB
576 MB
i