Xerox Phaser 6360

Printing on Both Sides of the Paper
Phaser® 6360 Color Laser Printer
3-23
Printing on Both Sides of the Paper
This section includes:
■ Automatic 2-Sided Printing Guidelines on page 3-23
■ Binding Edge Options on page 3-24
■ Selecting 2-Sided Printing on page 3-24
Note: For information about manual two-sided printing, go to the Online Support Assistant at
www.xerox.com/office/6360support
.
Automatic 2-Sided Printing Guidelines
Automatic 2-sided printing is available from the Phaser 6360DN, 6360DT, and 6360DX
configurations. Before printing a 2-sided document, verify that the paper is a supported size
for the tray. For a list of supported paper sizes, see Supported Paper and Media on page 3-3.
For a list of paper types and weights, print the Paper Tips page:
a. Select
Information, and then press the OK button.
b. Select
Information Pages, and then press the OK button.
c. Select
Paper Tips Page, and then press the OK button.
The following paper and media cannot be used for 2-sided printing:
■ Transparencies
■ Envelopes
■ Labels
■ Any die-cut specialty media, such as business cards
■ Thick card stock
See also:
Supported Paper and Media on page 3-3
Printer Configurations on page 1-4
Downloaded From ManualsPrinter.com Manuals