Xerox Phaser 6360

Cleaning the Printer
Phaser® 6360 Color Laser Printer
5-2
Cleaning the Printer
This section includes:
■ Cleaning the Outside of the Printer on page 5-2
■ Cleaning the Density Sensor on page 5-2
For safety information, see User Safety on page A-1.
Cleaning the Outside of the Printer
To remove stains, clean the outside of the printer using a soft, damp cloth moistened with a
mild neutral detergent. Do not spray detergent directly onto the printer.
Warning: To prevent electric shock, turn the printer off and unplug the power cord from the
electrical outlet before cleaning the printer.
Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.
Cleaning the Density Sensor
The printer displays a message when the density sensor needs cleaning. To clean the density
sensor:
1. Push up the latch on the front of the printer to open Front Door A.
6360-046
Downloaded From ManualsPrinter.com Manuals