Xerox Phaser 7100 System Administrator Guide

Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
33
3. Type Network User ID Attributes.
4. Type Attributes of Smart Card.
5. Click Apply.
Configuring Authorization Access for LDAP
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols > LDAP > LDAP
Authorization Access.
2. Type the access information of the system administrator next to System Administrator Access.
3. Type the access information of the accounting administrator next to Accounting Administrator
Access.
4. Click Apply.
Configuring Filters for LDAP
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols > LDAP > Custom
Filters.
2. In the User ID Query Filter field, type the LDAP search string or filter that you wish to apply. The
filter defines a series of conditions that the LDAP search must fulfill in order to return the
information you want.
Note: The search string should be formatted as LDAP objects inside of parentheses. For example,
to find the user with a sAMAccountName of Bob, type (objectClass=user)
(sAMAccountName=Bob).
3. Click Apply.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm