Xerox Phaser 7100 System Administrator Guide

Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
39
Bonjour
To view the Host Name and Printer Name automatically assigned to this machine under Bonjour, do
the following:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click Bonjour.
Note: If Bonjour is not displayed in the Properties tab, click Port Settings and check Bonjour. Click
Apply. If Bonjour is not available in the Port Settings list, click TCP/IP in the Protocols folder, and
scroll to the bottom of the displayed page to Zero-Configuration networking.
3. Under Bonjour Port Status, select Enabled.
4. Make a note of the Host Name and Printer Name for reference in working with other Bonjour
(zero-configuration) connected computers.
Note: You can change these names, however the Host Name must be unique on the network. The
automatically generated Host Name should assure its uniqueness. The Host Name has a
32-character limit, and the Printer Name has a 62-character limit. If you change either name, be
sure to click Apply. You can reboot the printer remotely using the Reboot Machine button, which is
available on the Status tab of CentreWare Internet Services.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm