Xerox Phaser 7100 System Administrator Guide

Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
38
UPnP Discovery
The Universal Plug and Play discovery protocol is used to identify the available network devices and
establish network services.
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click UPnP Discovery.
3. Select Enabled next to UPnP Port Status.
4. Next to Port Number, type a value between 1 and 65535. The default value is 180.
5. Click Apply to save the new settings or click Undo to retain the previous settings.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm