Xerox Phaser 7100 System Administrator Guide

Administrator Tools
Phaser 7100 Color Printer
System Administrator Guide
79
System Settings
Setting Default System Settings
1. At the printer control panel, press Menu.
2. Navigate to Admin Menu > System Settings to set the default system settings.
3. Change the following settings as necessary:
• Start up page: Select Print to print the start up page every time you request a print job.
• Alert Tone: Set the alert tone as Soft, Normal, Loud, or Off.
• Auto Clear: Set the system to display when a certain amount of inactive time, in minutes, has
passed.
• Dew Prevention: Set Enabled to prevent dew formation.
• Set Jobs View: Specify the types of jobs that display when the Job Status button is pressed.
4. Press OK.
Setting the Paper Size Preference at the Control Panel
1. At the printer control panel, press Menu.
2. Navigate to Admin Menu > System Settings > mm/inches.
3. To display paper sizes in inches or metric, specify the measurement for the units.
4. Press OK.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm