Xerox Phaser 7760

Cleaning the Printer
Phaser® 7760 Color Laser Printer
5-4
4. Remove the laser cleaning wand from the front door.
5. Insert the laser cleaning wand into the slot, there is a slot for each imaging unit labeled one
through four.
6. Push the wand all the way into the printer until you hear a click or the arrow on the wand
aligns with the front of the printer.
Note: If you fail to insert the laser cleaning wand fully into the printer, the laser window
will not be cleaned properly.
7. Repeat Steps 4 and 5 for each slot.
8. Place the laser cleaning wand back inside the front door.
7760-160
7760-159
1
2x
3
2
Downloaded From ManualsPrinter.com Manuals