Xerox Phaser 7760

Solving Print-Quality Problems
Phaser® 7760 Color Laser Printer
4-6
Light Lines or Streaks in One Color
Problem
Solution
1. Open the front door.
2. Remove the waste cartridge.
3. Clean the laser window for the color affected with the laser window cleaner wand. See
Cleaning the Laser Window on page 5-3.
Note: The laser window cleaner wand is located inside the front door. Insert the wand
until the arrow aligns with the front plate of the printer.
4. Return the waste cartridge to the printer.
5. If the problem continues after cleaning the laser window, replace the imaging unit that
corresponds to the color affected.
Thin, light or white lines appear in only one color.
Downloaded From ManualsPrinter.com Manuals