Xerox Phaser 7760 User Guide

Printing on Specialty Media
Phaser® 7760 Color Laser Printer
3-37
Printing Envelopes from Tray 1 (MPT)
1. Open Tray 1 (MPT).
2. Insert the envelopes into Tray 1 (MPT), and adjust the paper guides to match the size of
the envelopes.
■ Place the side to be printed facedown.
■ Place the flap faceup and entering the printer first.
3. When the control panel prompts you to confirm the type and size of paper in the tray:
a. Select
Change setup, and then press the OK button.
b. Select
Envelope as the paper type, and then press the OK button.
c. Select the appropriate envelope size, and then press the OK button.
Note: For some sizes that can be loaded in either direction, you need to select the size
with the letters
LEF (Long-Edge Feed) if you loaded the long edge of the paper to enter the
printer first or
SEF (Short-Edge Feed) if you loaded the short edge to enter the printer first.
4. In the printer driver, select Tray 1 (MPT) as the paper source and/or select Envelope as
the paper type.
7760-027
7760-123
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 7760 Specifications

General

Brand	Xerox
Model	Phaser 7760
Category	Printer
Language	English