2. Hold the belt on the waste container, then remove the container with both hands.
3. Discard all paper waste and scraps.
Note: Ensure that the waste container is emptied completely. If any paper waste or scraps remain, the
container becomes full before a control panel message appears, causing the printer to malfunction.
4. Reinsert the empty waste container, then slowly push in the container until it stops.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 475
SquareFold
®
Trimmer Module
To Next Page
Loading...
Need help?
General