7. Keep the paper wrapped and stored away from humidity and dirt.
8. If the optional 550-Sheet Feeder is installed, unlock, then uninstall it before you move the printer.
9. Lift and carry the printer as shown in the illustration.
Note
• When moving the printer, do not tilt it more than 10 degrees in any direction.
• Repack the printer and its options using the original packing material and boxes or a Xerox
Repackaging Kit.
• Failure to repackage the printer properly for shipment can result in damage not covered by the
Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
®
Warranty,
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused
by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
7-15Xerox
®
VersaaLink
®
B600/B610 Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General