Xerox VersaaLink B600

Installing the Wireless Network Adapter
The optional Wireless Network Adapter plugs in to the back of the printer. After the adapter is installed,
and wireless networking is enabled and configured, the adapter is able to connect to a wireless network.
To install the Wireless Network Adapter:
1. Power off the printer.
2. To remove the Wireless Network Adapter Port Cover, press down on the latch, then pull the cover
away from the printer.
3. Remove the packaging from the Wireless Network Adapter.
4. To install the Wireless Network Adapter, follow the procedure defined on the instruction sheet provided
with the Wireless Network Adapter.
2-13Xerox
®
VersaaLink
®
B600/B610 Printer
User Guide
Getting Started