Loading Paper
Loading Paper in the Bypass Tray
To load paper in the Bypass Tray:
1. Open the Bypass Tray. If the Bypass Tray is loaded with paper already, remove any paper that is a
different size or type.
2. For larger paper sizes, pull out, then open the Bypass Tray extension.
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Xerox
®
VersaaLink
®
B600/B610 Printer6-6
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General