- Touch Security, then select the security method that your wireless network uses.
- Touch Enter Password, then enter the password for your wireless network.
- Touch OK.
5. To activate your Wi-Fi setting changes, press the Home button.
6. At the prompt, touch Restart Now.
7. After the printer restarts, wait two minutes, then to get the network information that includes the
IP address, print a Configuration Report. For more information, refer to Printing the Configuration
Report.
Connecting to Wi-Fi Direct
You can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smartphone,
using Wi-Fi Direct. Wi-Fi Direct is disabled by default.
Note
Wireless networking is available only on printers with the optional Wireless Network Adapter installed.
Connecting with Wi-Fi Direct from Your Mobile Device
To connect with Wi-Fi Direct, follow the directions provided with your mobile device.
Initial Printer Setup
Before installing the printer software, verify that the printer is set up correctly. Setup includes enabling
the optional features and assigning an IP address for the Ethernet network connection. The installation
wizard starts automatically the first time the printer is powered on. The installation wizard prompts the
system administrator to configure the following settings:
• Language
• Network Connection
• Proxy Server Setup
• Date and Time
• Measurements
• LDAP Settings
• Apps Setup
• Security Settings
For more information on configuring the printer settings, refer to the System Administrator Guide at
www.xerox.com/office/VLB600_VLB610docs.
Configuring AirPrint
AirPrint
®
is a software feature that allows you to print from wired or wireless Apple iOS-based mobile
devices and Mac OS-based devices without the need to install a print driver. AirPrint
®
-enabled printers
allow you to print directly from a Mac, an iPhone, iPad, or iPod touch. You can use AirPrint
®
to print from
a wired device or a wireless device without using a print driver.
2-21Xerox
®
VersaaLink
®
B600/B610 Printer
User Guide
Getting Started
To Next Page
Loading...
Need help?
General