Xerox VersaaLink B600 User Manual

Setting the Tray Mode
Tray Mode determines if you are prompted to confirm or modify paper settings when you load paper
in the tray. Tray Mode defines how the printer behaves when a paper conflict or mismatch occurs.
To configure the Bypass Tray Mode:
1. At the printer control panel, press the Home button.
2. Touch Device > Paper Trays.
3. Touch the Bypass Tray icon. It is displayed in the top position, before the numbered trays.
4. Touch Tray Mode.
5. Touch the desired mode:
• Bypass prompts you to confirm or modify paper tray settings when paper is loaded in the Bypass
Tray. The Bypass Tray Mode sets the Bypass Tray as the default tray for all print jobs without a
specified tray.
• Fully Adjustable prompts you to confirm or modify paper tray settings when paper is loaded in
the Bypass Tray.
6. To save the setting, touch OK.
7. To return to the Home screen, press the Home button.
Configuring the Tray Mode for Trays 1–5
1. At the printer control panel, press the Home button.
2. Touch Device > Paper Trays.
3. Touch the desired tray.
4. Touch Tray Mode.
5. Touch the desired mode:
• Fully Adjustable prompts you to confirm or modify paper tray settings when paper is loaded in
a tray.
• Dedicated uses the current paper size and type settings and does not prompt you to confirm or
modify the settings. Select this setting to use a tray for printing on a specific paper type and size,
such as letter-size or hole-punched paper.
6. To save the setting, touch OK.
7. To return to the Home screen, press the Home button.
Printing on Special Paper
To order paper or other media, contact your local reseller or visit
www.xerox.com/office/VLB600_VLB610supplies.
For reference:
• www.xerox.com/rmlna Recommended Media List (United States)
• www.xerox.com/rmleu Recommended Media List (Europe)
6-15Xerox
®
VersaaLink
®
B600/B610 Printer
User Guide
Paper and Media

Xerox VersaaLink B600 Specifications

General

Brand	Xerox
Model	VersaaLink B600
Category	Printer
Language	English