Xerox VersaLink B610

IITTEEMM NNAAMMEE
DDEESSCCRRIIPPTTIIOONN
5 Power/Wake This button serves several power-related functions.
• When the printer is off, this button powers on the printer.
• When the printer is on, pressing this button displays a menu
on the control panel. From this menu, you can choose to
enter Sleep mode, restart, or power off the printer.
• When the printer is on, but in a low-power or Sleep mode,
pressing this button wakes the printer.
• When the printer is powered on, holding this button for 5
seconds powers off the printer.
This button also blinks to indicate the power status of the
printer.
• When the light blinks slowly, the printer is in Low Power or
Sleep mode.
• When the light blinks fast, the printer is powering down, or
exiting a low-power mode.
6 Status LED This light blinks blue or amber to indicate printer status.
• BBlluuee
– Blinks once slowly to acknowledge a successful
Authentication request.
– Blinks once slowly for a Copy or Print job initiated at the
control panel.
– Blinks twice slowly for Fax or Print job received from the
network.
– Blinks fast while the printer is powering up, or to signal
detection of a Wi-Fi Direct connection request
• AAmmbbeerr
– Blinks to indicate an error condition or warning that
requires your attention. For example, an out-of- toner
condition, a paper jam, or out of paper for the current
job.
– The printer status LED also blinks amber to indicate a
system error, which typically is associated with an error
code.
Xerox
®
VersaLink
®
B600/B610 Printer User Guide 25
Getting Started