Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
35
NOTE :
When the Authentication feature is enabled, you are required to enter your user ID and your
password. You need to enter your user ID and your password to access
Embedded Web Server
to
configure and use the security functions of the machine.
When your access to
Embedded Web Server
is encrypted, enter https:// followed by the IP address
or the Internet address, instead of “http://”.
User Authentication
This section describes the operation of user authentication.
Before using, all services and configuring settings, a user must be authenticated with an ID and a
password.
Log in to the
Embedded Web Server
.
1.
Select
Log In
.
2.
Select the user account from the list, or enter the user name.
3.
Enter the password.
4.
Select
Log In
.
NOTE :
Enter the user name for the Network authentication. For the Local authentication, the user identification varies
depending on the settings.
When the Network authentication system is Kerberos, entering the realm or domain is required. For Kerberos,
enter the user name and realm in the UPN format (<username>@<realm>).
All features on the
Embedded Web Server
become available.
Create User Accounts
This feature allows you to register user account information, such as User IDs and passwords.
This feature is only applicable to Local Authentication mode.
1.
Select
Permissions
.
2.
Select
Add
for User Accounts.
3.
Enter a user ID for
User Name
.
4.
Enter a password for
Password
.
5.
Enter the same password for
Retype Password
.
6.
Select
Add
.
User ID (User Name)
Allows you to enter a User ID using Web Browser. You can enter up to 64 alphanumeric characters
as a User ID.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
