Xerox Versant 280 Press - Logical ports and filtering information; IPSec, mode descriptions; 802.1 x: description of interface and encryption capabilities, wired and wireless; IP Filtering description

Logical ports and filtering information
IPSec, mode descriptions
IPsec or Internet Protocol security provides security to all applications over IP protocols through encryption and
authentication of every packet. e Fiery server uses pre-shared key authentication to establish secure connections
with other systems over IPsec. Once secure communication is established over IPsec between a client computer and
a Fiery server, all communications — including print jobs — are securely transmitted over the network.
802.1x: description of interface and encryption capabilities, wired and wireless
802.1x is an IEEE standard protocol for port-based network access control. is protocol provides an authentication
mechanism before the device gets access to the LAN and its resources. When enabled, the Fiery server can be
configured to use EAP MD5-Challenge or PEAP-MSCHAPv2 to authenticate to an 802.1x authentication server.
Fiery server authenticates at boot time or when the Ethernet cable is disconnected and reconnected.
IP Filtering description
e Administrator can restrict authorized connections with the EX Print Server from those hosts whose IP
addresses fall within a particular specified IP range. Commands or jobs sent from non-authorized IP addresses are
ignored by the EX Print Server.
Ports
e full listing and purpose of TCP and UDP ports that are associated with the features.
TCP
UDP Port Name
80 HTTP
20-21 FTP
135 MS RPC
137-139 NETBIOS
Product Security Guide
Logical ports and filtering information
13