Media Output Locations
Xerox® WorkCentre® 3215/3225
User Guide
95
Using the Rear Cover
When using the rear cover, paper comes out of the machine
face up. Printing from the manual feed slot to the rear cover
provides a straight paper path and might improve the output
quality when printing on special media. Whenever the rear
cover is open, the output is delivered there.
Note: The rear cover output can only be used for simplex
jobs. Duplex printing with the rear cover open causes
paper jams.
CAUTION: The fuser area inside the rear cover of your machine becomes very hot when in use.
Take care when you access this area.
To Next Page
Loading...
