General Care
Xerox® WorkCentre® 3215/3225
User Guide
212
4. Re-install the drum cartridge and then the toner
cartridge. Tabs on the sides of the cartridge and
corresponding grooves within the machine will guide
the cartridge into the correct position until each locks
into place.
5. Close the front cover.
6. Plug in the power cord and turn on the machine. When
the green machine status light is solid, the machine is
ready.
Moving the Machine
• When moving the machine, do not tilt or turn it upside down as the inside of the machine may
become contaminated with toner, which can cause damage to the machine or adversely affect
print quality.
• When moving the machine, make sure to hold the machine securely from the bottom.
To Next Page
Loading...
