E-mail Setup
Xerox® WorkCentre® 3215/3225
User Guide
81
4. Enter a few letters of a name in the LDAP Address Book. The machine will return matching names.
5. Press the up/down arrows until the name you want displays and press OK.
6. The Enter Destination Addresses screen displays.
7. Enter a destination e-mail address.
8. When Another Address? displays, press the up/down arrows to select Yes or No and press OK.
9. Highlight the required File Format and press OK.
10. Enter an e-mail subject and press OK.
11. Place a document in the document handler and press the Start button.
12. Verify that the recipient receives the scanned document in their e-mail inbox.
Address Book
To set up an address book for e-mail, refer to the Address Book chapter of this User Guide.
To Next Page
Loading...
