Paper and Media
Xerox
®
WorkCentre
®
3655/3655i Multifunction Printer 55
User Guide
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray.
6. Load hole punched paper with the holes to the right.
7. For 1-sided and 2-sided printing, to load letterhead or pre-printed paper, place letterhead face down
with the top edge going into the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
To Next Page
Loading...
